rfid_antenna
by tompaynter
6 parts · 53 × 59 mm
heypcb · Circuit World · Open hardware
rfid-quadrifilar-antenna
by theantennaguygithub.com/theantennaguy/rfid-quadrifilar-antenna
This repository olds the board project and files to fabricate a quadri-filar antenna for an RFID reader application, or any other application where a directional RHCP antenna working at 800-1000 MHz is required.
Loading preview
- Board size
- 95 × 95 mm
- Parts
- 10 parts
- Nets
- 8 nets
- Licence
- CERN-OHL-S v2
Imported from a public repository by theantennaguy. View the source
CERN-OHL-S-2.0 — Share-alike (CERN-OHL-S-2.0): a board you derive from this one must be released under CERN-OHL-S-2.0 too, with source.
Is this yours? Claim it by signing in with the GitHub account it was published from.
Filed under
More like rfid-quadrifilar-antenna
Boards whose names, descriptions and tags overlap most with this one.
rfid-reader
by nfq-makers
61 parts · 28 × 66 mm
rfid-breakout
by StarGate01
3 parts · 39 × 39 mm
134khz_Rfid_Reader
by harsha-2-006
18 parts · 93 × 65 mm
rf_noise_antenna
by antonjan
47 parts · 65 × 57 mm
Antenna_Impedance
by lwa-project
15 parts · 114 × 114 mm
tart_antenna
by tart-telescope
10 parts · 100 × 100 mm
wifi-ble-antenna
by Dominik-Workshop
6 parts · 41 × 43 mm
PCSK225-Antenna
by J-K-Kowalski
13 parts · 20 × 60 mm
matrix_antenna_switch
by sq9nje
154 parts · 213 × 96 mm
satellite-s-band-antenna
by AcubeSAT
5 parts · 47 × 47 mm
S-Band-Antenna
by ICDT-Inatel-Cubesat-Design-Team
8 parts · 82 × 89 mm
heypcb keeps a picture and the design files for this board, and there is no project behind this page until somebody opens one. Opening it makes a copy on your own account — the original stays where its author put it.
